Skip to content
hintergrund bild

Murexin

Swimming pool reaction resin

1
2
3
4
5
6
7
8
9

Brine and thermal baths give particular exposure to chemical and thermal influences. When processing reaction resins, careful attention must be paid to use the correct mixing ratio, proper processing and protection of health. Inside a swimming pool, only mosaics with paper or film stuck to the front side may be used, in order to ensure full-surface gluing. For pools filled with brine, a laying system based on reaction resin is always recommended. After waterproofing, the pool should be filled with chlorinated water to prevent algae formation under the laid mosaic. At the same time, the water-tightness of the pool can be checked. Depending on the type of pool edge with overflow channel, care must be taken to ensure that there is a capillary seal to the adjacent components.